Computer & Web Solutions

System Requirements NT 4.0 Workstation
System Requirements NT 4.0 Server
Hardware Compatibility List
Updating Security and Windows Software
Where did my *.PWL Files go?
My CD Recording software stopped working when I upgraded Windows Media Player
Install 4.0 unattended without EULA
Security Audit Passwords NT/2000/XP
How do I run my own FTP or Web Server
Print IP Configuration to a file
Print a directory to a file

System Requirements NT 4.0 Workstation

INTEL-BASED SYSTEMS

Pentium or faster processor 16 megabytes (MB) of memory (RAM); 32 MB recommended
110 MB of available hard disk space
CD-ROM drive or access to a CD-ROM over a computer network
VGA or higher-resolution display adapter
Microsoft Mouse or compatible pointing device

RISC-BASED SYSTEMS

Workstation with Alpha AXP, MIPS R4x00, or PowerPC processor
16 MB of memory
110 MB of available hard-disk space
CD-ROM drive or access to a CD-ROM over a computer network
VGA or higher-resolution display adapter
Microsoft Mouse or compatible pointing device

System Requirements NT 4.0 Server

Intel and compatible systems*

486/33 megahertz (MHz) or higher, or Pentium, or Pentium PRO processor.
125 megabyte (MB) of available hard disk space minimum.

RISC-based systems*
RISC processor compatible with Windows NT� Server version 4.0

160 MB of available hard disk space
16 MB of memory (RAM)
CD-ROM drive
VGA,Super VGA, or video graphics adapter compatible with Windows NT Server4.0
* See your reseller for a list of compatible systems and peripherals.

Note: The retail version of Windows NT Server 4.0 supports up to four microprocessors out of the box. Support for up to 32 processors is available from your hardware vendor.

Networking options
Microsoft Windows NT Server 4.0 works with the following:

Microsoft LAN Manager
Microsoft Windows for Workgroups operating system
AppleTalk
DECPATHWORKS
IBMLAN Server
IBMSNA networks
The Internet
NFSnetworks
Novell NetWare
Remote Access Services by way of ISDN, X.25, and standard phone lines
TCP/IP networks
Clients supported

Windows 3.x operating system
Windows for Workgroups
Windows 95 operating system
Windows 98 operating system
Windows NT Workstation
Apple Macintosh
MS-DOS� operating system
OS/2
UNIX (Requires ODBC [Open Database Connectivity] client software from VisigenicSoftware, San Mateo, California.)
Windows NT 4.0 Option Pack System Requirements
To run Internet Information Server 4.0 (IIS), or any of the features on the Windows NT 4.0 Option Pack on Windows NT Server 4.0, or Windows NT Workstation 4.0, you will need to have installed both Windows NT Service Pack 3 or Service Pack 4 and Microsoft Internet Explorer 4.01. Additional requirements vary according to your operating system.

Intel and compatible systems**

486/66 MHz processor or higher
32 MB of RAM or higher
50 MB of available hard-disk space for Windows NT Server
40 MB of available hard-disk space for Windows NT Workstation
RISC-Based Systems **

150 MHz Alpha processor or higher
32 MB of RAM or higher
50 MB of available hard-disk space for Windows NT Server
40 MB of available hard-disk space for Windows NT Workstation
Microsoft Windows 95-based systems

486/33 MHz processor or higher
16 MB of RAM
40 MB of available hard-disk space
Actual requirements will vary according to your system configuration and the features you choose to install. IIS 4.0 and Personal Web Server 4.0 require one of the following operating systems:

Windows NT Server 4.0
Windows NT Workstation 4.0
Windows 95
Windows 98

** See your local reseller for a list of Windows NT compatible systems and peripherals.

Hardware Compatibility List

That HCL is a guideline that Microsoft uses to make sure that this hardware has been tested with the OS and is able to work with the drivers supplied from the manufacture or from Microsoft.  Please check this list to make sure that your hardware is compatible with this version of Windows.  This list cam be found at this web site http://www.microsoft.com/hcl

Updating Security and Windows Software

To update all of your windows software to get the latest security fixes and software updates for windows go to this web address. http://windowsupdate.microsoft.com

Where did my *.PWL Files go?

Windows 2000 is not based on the windows 9x kernel.  It is based on the NT kernel and NT handles security in a file called the Security Account Management (SAM) file.  This file can not be deleted to clear out a password problem like you could with the old versions of Windows.  You can however restore a previous version of the file using the ERD Disks, or the Backup software.  If you do not have administrator rights to the system you will need to boot to a command prompt and you can use a third party software to crack the password file.  For security auditing software to scan the SAM file there is a program that can be purchased to scan usernames and passwords.  The program is called LC3 and can be downloaded at http://www.atstake.com.

My CD Recording software stopped working when I upgraded Windows Media Player

If you are using Adaptec Easy CD Creator to burn CDs on your computer you will have to install the patches for your current version to make Easy CD Creator work again.  You can download the patches from http://www.adaptec.com or http://www.roxio.com

Install NT 4.0 unattended install without EULA

During the normal install it makes you accept the End User License Agreement.  If you want to do an unattended install it still asks you to accept the EULA.  Well here is a way around it.

Add the following line directly below the [Unattended] section of the Unattend.txt file:

OemSkipEula=yes

This option makes the setup program skip the EULA screen.

Note: Selecting this option does not mean you can install NT without agreeing to the EULA. By selecting this option in the Unattend.txt file, you implicitly agree to its terms.

Security Audit Passwords NT/2000/XP

If you need to find the lost password to an x-employee or looking to migrate users to another system and need to know their passwords.  Here is a software tool you need.  LC4 (as of 7/19/2002) This program will look at the SAM file, Registry and can even sniff your network if you want it to, to get those missing passwords you need to have.  The Original program name was L0phtCrack from heavy industries.  Now you have get this program from @stake.  Here is the web address where you can get more info about this program. http://www.atstake.com/research/lc/index.html

How do I run my own FTP or Web Server

Windows 2000 Pro and Windows 2000 Server come with Internet Information Server (IIS) as components of Windows.  With Windows NT 4.0 Server you will have to download Option Pack 4.  This has Internet Information Server 4.0 for Windows NT 4.0 Server.  With Windows 2000 Pro you have a limitation that only 10 people can connect at one time.  With Windows NT 4.0 Server, Windows 2000 Server, and Windows .Net Server you can have unlimited users access your websites or FTP server at a time.  To Add IIS to your Computer follow these instructions:

1. Click Start, Control Panel
2. Double Click on Add/Remove Programs
3. Click on Add/Remove Windows Components
4. Place a checkmark in Internet Information Server (IIS) (or Details if you want to select options for IIS)
5. Click on Ok (or Ok Twice if you selected options)
6. Computer may need to be restarted click yes to restart your computer

If you are using a firewall please check to make sure that you have opened the right ports and direction for you server.  If you need to find these ports please check out our Antivirus, Utilities, and Server Products section for more information.

If your ISP doesn't assign you a static IP address for your server you may want to look into a service like http://www.no-ip.com where they have a DNS server that will give your computer an Domain Name and they have software that will check your computers IP address each time it connects to the internet.  It will update their DNS server with the new IP address so you don't have to go and change it your self.

Print IP Configuration to a file

May times you may want to document what the settings are on your servers as for IP configurations and more.  Here is a way to copy what is displayed on the screen to a text file.  Then you can save the file where ever you want to for disaster recovery info if you want to.

At a command prompt you normally run the ipconfig /all to get all of your IP information.  Type the following at the command prompt and you will get a text file at the root directory of the C: drive named IPInfo.txt.

ipconfig /all > C:\IPInfo.txt

Now you will have a txt file that can be opened with any program like Notepad, Word, WordPerfect

Print a directory to a file

Some times you just need to print a directory to a file or printer.  Here is an easy way to get that file to a text file.  Then just print the file out if you need a hard copy of it.  Do the following at the command prompt.

dir *.* > C:\DirInfo.txt

Now you will see a text file in the root directory of the C drive called DirInfo.txt.